Onlie It certification exam–Pass4side

More info http://www.pass4side.com/2B0-012.htm

1. How many static routes can the Matrix C1 support?

A. 250

B. 500

C. 1,000

D. 2,000

Answer: C

 

2. Which IP Address Class is reserved for Multicast?

A. Class A

B. Class B

C. Class C

D. Class D

E. Class E

Answer: D

 

3. Which IP address will trigger Remote IP Address Discovery?

A. 10.1.1.1

B. 172.16.0.1

C. 255.255.255.255

D. 0.0.0.0

Answer: D

 

4. The Data Link layer of the OSI model defines which sub-layers?

A. LLC

B. MAC

C. CSMA

D. none of the above

E. both A & B

Answer: E

 

5. Which information does a bridge use to build its SAT?

A. the source’s logical address

B. the source’s physical address

C. the destination’s logical address

D. the destination’s physical address

Answer: B

 

6. What version of management does the Matrix-E1 support?

A. SNMP-v4

B. IGMP

C. SNMP-v3

D. Level 2

Answer: C

 

7. Which groups of RMON does the Matrix C2 support?

A. the C2 supports 4 groups of RMON (groups 1,2,3 and 9)

B. the C2 supports 4 groups of RMON (groups 1,2,3 and 4)

C. the C2 supports 5 groups of RMON (groups 1,2,3, 4 and 9)

D. the C2 supports all 9 groups of RMON

Answer: A

 

8. What is the first factor considered in the election of a Designated Bridge by 802.1D compliant bridges using the Spanning Tree Algorithm?

A. the port ID number

B. the path cost to Root

C. the bridge MAC address

D. the bridge priority number

Answer: B

 

9. What is the default VLAN assignment method for Enterasys 802.1Q switches?

A. MAC

B. Port

C. Protocol type

D. DSAP or SSAP values

Answer: B

 

10. What is the command to disable Spanning Tree on Fast Ethernet port #11 in a platinum DFE module in slot #1?

A. Matrix (rw)-> set spantree portstatus fe.1.11 disable

B. Matrix (rw)-> set spantree systemadmin fe.1.11 disable

C. Matrix (rw)-> set spantree systemstatus fe.1.11 disable

D. Matrix (rw)-> set spantree portadmin fe.1.11 disable

Answer: D

Tags: Other certification, Pass4side, Pass4side // Add Comment »

More info http://www.pass4side.com/1Z0-047.htm

1. Which statements are true? (Choose all that apply.)

A. The data dictionary is created and maintained by the database administrator.

B. The data dictionary views can consist of joins of dictionary base tables and user-defined tables.

C. The usernames of all the users including the database administrators are stored in the data dictionary.

D. The USER_CONS_COLUMNS view should be queried to find the names of the columns to which a constraint applies.

E. Both USER_OBJECTS and CAT views provide the same information about all the objects that are owned by the user.

F. Views with the same name but different prefixes, such as DBA, ALL and USER, use the same base tables from the data dictionary

Answer: CDF   

 

5. Which three statements are true regarding single-row functions? (Choose three.)

A. They can accept only one argument.

B. They can be nested up to only two levels.

C. They can return multiple values of more than one data type.

D. They can be used in SELECT, WHERE, and ORDER BY clauses.

E. They can modify the data type of the argument that is referenced.

F. They can accept a column name, expression, variable name, or a user-supplied constant as arguments.

Answer: DEF   

 

8. Which two statements are true regarding operators used with subqueries? (Choose two.)

A. The NOT IN operator is equivalent to IS NULL.

B. The <ANY operator means less than the maximum.

C. =ANY and =ALL operators have the same functionality.

D. The IN operator cannot be used in single-row subqueries.

E. The NOT operator can be used with IN, ANY and ALL operators.

Answer: BE   

 

 

 

 

 

 

12. Which two statements are true regarding views? (Choose two.)

A. A simple view in which column aliases have been used cannot be updated.

B. A subquery used in a complex view definition cannot contain group functions or joins.

C.  Rows cannot be deleted through a view if the view definition contains the DISTINCT keyword.

D. Rows added through a view are deleted from the table automatically when the view is dropped.

E. The OR REPLACE option is used to change the definition of an existing view without dropping and re-creating it.

F. The WITH CHECK OPTION constraint can be used in a view definition to restrict the columns displayed through the view.

Answer: CE   

Tags: Oracle, Pass4side, Pass4side // Add Comment »

More info from: http://www.pass4side.com/922-095.htm

 

1. You are deploying a Communication Server (CS) 1000E system with a CP-PM Call Server and the campus redundancy feature. It is mandatory that you configure the CP-PM Call Server side for the campus redundancy feature to operate properly. In which two locations is the Call Server side configured? (Choose two.)

A. the BIOS menu

B. the Installation menu

C. the CLI using LD 97 Superloop commands

D. the CLI using LD 117 CPU Location commands

Answer: AB

 

2. A customer has successfully installed a Media Gateway Controller (MGC) in a Communication Server (CS) 1000E system. The MGC has registered with the Call Server.

 

Which is displayed on the MGC LED display to confirm successful registration?

A. The MGC display will read PASS

B. The MGC display will read OAD

C. The MGC display will read exxx ( E000).

D. The MGC display will show Superloop and Shelf of MG 1000E (4 0).

Answer: D

 

3. A customer is implementing a Communication Server (CS) 1000 Rls.5.0 Communication Server 1000E High Availability (HA) system. The customer wants to know if there are any special package requirements beyond the HA Package needed for the system. Which two software packages are mandatory when deploying a CS 1000E HA system? (Choose two.)

A. SBO - Branch Office Package 390

B. SOFTSWITCH - Soft Switch Package 402

C. IPMG - Media Gateway 1000E Package 403

D. SIP - SIP Gateway and Converged Desktop Package 406

Answer: BC

 

4. A customer is commissioning a Communication Server (CS) 1000E Rls. 5.0 system with Package 403 (Softswitch) and 402 (IPMG). The CP-PM Call Server software has been installed successfully, and now the customer is provisioning the Media Gateway Tone and Conference Loops for the Media Gateway Controller. Which switch overlay and prompt should the customer use to configure the Media Gateway TDS loop?

A. LD 17, XCT

B. LD 17, VXCT

C. LD 97, SUPT

D. LD 17, MGTDS

Answer: D

 

5. A customer is installing a Media Gateway Controller (MGC) in a Communication Server (CS) 1000E system. The customer is connected to SDI 0 of the MGC to access the configuration menu. No IP information exists for the MGC.

How does the customer get to the mgcsetup menu to configure the MGC?

A. Type mgcsetup on the screen.

B. No action required. The MGC will boot directly into the setup menu.

C. The prompt press any key to stop auto-boot and enter mgcsetup appears.

D. Enter a shell command. <CTRL>O<CTRL>A<CTRL>M, provide OAM username and password to access OAM shell.

Answer: B

Tags: Nortel, Pass4side, Pass4side // Add Comment »

The latest 70-291 exam demo

download link:

http://www.plunder.com/-download-QoKh9hyWpkGQZga7DhYfGw.htm

Tags: MCSE, Microsoft // Add Comment »

The latest 70-290 exam demo

download link:

http://www.plunder.com/-download-pBjQOOpGJkSAIyUaohSY3w.htm

Tags: MCSE, Microsoft, Pass4side, Pass4side // Add Comment »